| ▪ Optically isolated, 1 kOhm at 4 V, 6.8 kOhm at 24 V typical |
| ▪ 0 to 120 kHz frequency range |
| ▪ 5 to 26 VDC supply voltage |
| ▪ 150 mA output current |
| ▪ 26 to 16 AWG wire gauge accepted |
| ▪ DIN rail EN50022 mounting |
| ▪ 0 to 50 deg C operating temperature |
| ▪ 98% non-condensing operational humidity |
| ▪ Encoder signal splitter eliminates the expense and maintenance of two separate encoders |
| ▪ Optically isolated outputs can be sent to a motor drive and a display at the same time |
| ▪ Combats long distance and electrical noise and interference problems |
| ▪ Encoder splitter board mounts to standard DIN rail EN50022 |
| ▪ Input signal - two or three channel quadrature signal, square wave, open collector, differential, or single ended line driver |
| ▪ Output signal - two independent, isolated line driver output sets |
| ▪ Output protection - ESD to MIL-STD-883 and short-circuit protected |
| ▪ 4 to 26 VDC input voltage |
| ▪ 2.2 mA minimum, 3.5 mA typical input signal current |
