| ▪ Standard unit End Caps each have a single 3/4 in NPT hub |
| ▪ Fixture is furnished with one 3/4 in close-up plug and two 3/4 in to 1/2 in reducers - provides out of the box 1/2 in dead-end to 3/4 in feed-through flexibility |
| ▪ Metric openings are available |
| ▪ Standard LALs have one wiring Access Plate for easy access to driver leads |
| ▪ Many Midpower LEDs blend light to simulate fluorescent tubes |
| ▪ Crisp White Light for Excellent Color Rendering - Chromaticity 5000K (CCT) approximately 70 CRI |
| ▪ Energy Savings - High lumens per watt |
| ▪ LED Array Life - to 212,000 maintenance free hours to 70% initial lumens |
| ▪ Ambient suitability -40 deg C to 65 deg C (see tables) |
| ▪ Instant On - Including after power interruption |
| ▪ Solderless LED Board Connections - Vibration Resistant |
| ▪ Standard supplemental 6KV surge protection |
| ▪ Optional supplementary surge protection available 20KA/10KV (120-277 VAC), 10KA/10KV (347-480 VAC) |
| ▪ LALxE models have "built-in" battery backup for 90 min emergency exit |
| ▪ Shallow design minimizes profile in work areas with low ceiling heights |
| ▪ Diffuse Lens Standard to minimize glare |
| ▪ Slot Back Design allows multiple mounting access points across length - slots can also be used with 5/16 in or 8mm bolts and nuts |
| ▪ 3 housing slots, 1 center back and 2 at 45 deg |
| ▪ Variety of mounting options including swivel brackets, wall, ceiling brackets, or beam clamps |
| ▪ End Caps each have 2 mounting feet built-in plus a safety strap attachment point |
