| ▪ 5-1/2 in ceiling cutout |
| ▪ AirSeal® IC, new construction, screw |
| ▪ 0 to 10 VDC dimmable driver |
| ▪ Universal voltage |
| ▪ Version A2 |
| ▪ AirSeal® housing minimizes air leakage to less than 2 cfm at 1.57 PSF (or 75 Pa), which complies with the international energy conservation code and Washington state energy code (section 502.4) |
| ▪ This reduces heat loss and condensation in ceiling |
| ▪ UL listed for direct contact with thermal insulation |
| ▪ Locks into position along length of mounting bars with locking screws |
| ▪ Access door for inspection of junction box |
| ▪ 0.026 in galvanized steel |
| ▪ 0.026 in galvanized steel, accommodates ceilings up to 1-1/4 in (32 mm) THK 3/8 in (9.5 mm) deep integral lip with four notches at 90 deg apart to simplify alignment |
| ▪ 2.5 x 5-3/8 x 2 in (27 cu-in) 0.032 in galvanized steel UL listed 90 deg supply conductors, rated for branch circuit wiring supplying connected luminaries (daisy chaining) |
| ▪ Permit easy and fast installation of light engine/trim |
| ▪ 0.059 in galvanized steel, bars pivot for easy attachment and wire-in below ceiling line, bars extend to accommodate 16 in (406 mm) to 24 in (610 mm) OC joist spacing |
| ▪ Bars can accommodate 12 in (305 mm) OC joist spacing after a slight field modification (see Instruction sheet), features integral self-tapping Phillips/square drive screws for secure attachment to wood or metal construction |
| ▪ Also available with integral nails, attaches to T-bar ceilings without the need of accessories, bars installed on shortest dimension of frame, but can be easily repositioned 90 deg from original position |
| ▪ 120 VAC, 50/60 Hz RoHS compliant, class 2 power supply, complies with FCC rules per title 47 part 15 (class B) for EMI/RFI (conducted and radiated) |
| ▪ Class A sound rating 0 to 10 VDC, 120/277 VAC, 50/60 Hz, RoHS compliant, class 2 power supply, complies with FCC rules per title 47 part 15 (class A) for EMI/RFI (conducted and radiated), class A sound rating |
