| ▪ Sensor power supply approximate 8.2 VAC, impedance 1.2 kohm control input |
| ▪ >200 us for standstill monitoring and >250 us for rotation direction detecion pulse duration |
| ▪ 2 mA/24 VDC minimum switch current |
| ▪ 20 ms energized/de-energized delay |
| ▪ 10 to the power 7 switching cycles mechanical life |
| ▪ 5 s/20 s, programmable start-up override |
| ▪ <=2 kHz frequency |
| ▪ 90 deg phase difference between pulse input signal 1 and 2, overlapping >=125 us rotation direction detection |
| ▪ IP20 degree of protection |
| ▪ 35 mm size |
| ▪ Signal conditioner |
| ▪ 24 VDC supply |
| ▪ PNP/push-pull, dry contacts or Namur inputs |
| ▪ Selectable frequency trip values |
| ▪ Two relay contact outputs |
| ▪ Start-up override |
| ▪ Selectable mode of operation |
| ▪ 8 VDC at 8 mA open circuit voltage/short-circuit current |
| ▪ 1.2 to 2.1 mA approximately 0.2 mA switching point/switching hysteresis |
