Page Loading...
print friendly Print Friendly
Eaton
FDM1 C-HINDS FD BOX DEEP MAL 1 HUB 1/2

Mouse over image to zoom, click to enlarge

  • FDM1 C-HINDS FD BOX DEEP MAL 1 HUB 1/2
  • FDM1 C-HINDS FD BOX DEEP MAL 1 HUB 1/2

Description: EATON Crouse-Hinds Condulet® Device Box, 1-Entry Deep, Series: FD Series, 1/2 in, 1 Gang, For Use With: Threaded Rigid/IMC Conduit, Surface Mount, Malleable Iron, Electro-Plated Zinc, 2.87 in W x 2.86 in D x 5.3 in H

Manufacturer PN: FDM1

UPC:  66227702657

Kendall Electric Inc PN: 3952030

Invoice Description:

FDM1 C-HINDS FD BOX DEEP MAL 1 HUB 1/2


SPEC SHEET
 
How Can We Make This Page Better?

EATON Crouse-Hinds Condulet® FDM1 1-Entry Deep Device Box With Mounting Lug And Ground Screw, 1/2 in Trade, 1 Gang, Malleable Iron, Electro-Plated Zinc

Log In for Pricing and Availability

Note: Lead times are estimates only

 
 

Description

Crouse-Hinds series FS and FD device boxes are installed in non-hazardous area conduit systems to accommodate wiring devices, act as pull boxes or provide openings for taps and splices. They are suitable for use in wet locations when used with gasketed covers. FS and FD device boxes are available in two box depths with a wide variety of gang configurations, hub configurations and hub sizes. They are manufactured in cast iron, aluminum, stainless steel and malleable iron. Malleable iron boxes are also available with a hot dip galvanized finish for added corrosion protection against road salt and other harsh environmental factors.
EATON Crouse-Hinds Condulet® Device Box, 1-Entry Deep, Series: FD Series, 1/2 in, 1 Gang, For Use With: Threaded Rigid/IMC Conduit, Surface Mount, Malleable Iron, Electro-Plated Zinc, 2.87 in W x 2.86 in D x 5.3 in H

Specifications

 Application Accommodate wiring devices, act as pull boxes for conductors in a conduit system, provides openings to make splices and taps in conductors, where box is subjected to rough use, indoor and outdoor, ordinary/non-hazardous locations, commercial, institutional buildings and structures applications
 Brand Name Crouse-Hinds
 Dimensions 2.87 in W x 2.86 in D x 5.3 in H
 Finish Electro-Plated Zinc
 Manufacturer Part Number FDM1
 Material Malleable Iron
 Mounting Type Surface
 Number of Gangs 1
 PART NUMBER KEYWORDS FDM1 ; 662277026574 ; 66227702657 ; 00662277026574
 Series FD Series
 Standards/Approvals cULus Listed|cCSAus Certified|CSA Certified
 Suitable For Use With Threaded Rigid/IMC Conduit
 Trade Size 1/2 in
 Type 1-Entry Deep

Features

▪ Green ground screw is located on the flange of the box for easy ground wire termination and is standard on boxes
▪ Suitable for use in wet locations when used with gasket and flat blank covers
▪ Tapered threaded hubs with integral bushing
▪ Malleable iron construction provides high tensile strength for strong, dependable service
▪ Ample wiring room provided
▪ Covers are individually bagged and supplied with screws
▪ (1) side cable entry
 
Time Zone 
 
 
 

Recently Viewed Products: